nostalgiecat: DIY poster hanger

In my last post I sowed you how you can make your own graphic poster for your walls... ...today I am sharing how I made the simple wooden poster frames! These types of "clamp on" poster frames are really practical if you like to change out your art frequently, and they also take up next to no space when storing. Save some money and make your own...it's easy!

You will need: Wooden bead moulding , like this 3mm brass screws and nuts x6 3mm brass washers x6 Small brass screw eyes x2 Brass chain Ruler pencil tape Wood saw Screw driver A drill and drill bits (3mm and 7/8mm...or however big your screws and nuts are) Araldite glue or other super-strong adhesive Fine grit sandpaper HERE'S HOW:

Cut the wooden beading to size. You'll need two lengths at the top AND bottom of your poster, so 4 equal lengths all together. Pair up the lengths and tape them tightly together. One pair for the top, and one pair for the bottom of your poster frame.

Use the ruler and pencil to mark out 6 equally spaced points on each pair of the wooden beading's.

Use the smallest drill bit to drill through on each spot.

By pairing up the beading and taping together before drilling, you ensure the holes will match up on the wood.

Undo the tape and separate the beading. Put the top beading to the side for now!

Now use the larger drill bit to make the holes on the bottom beading big enough to countersink the nuts. Take care not to drill all the way through.

Mix up some Araldite, and glue the nuts into the wooden beading.

Then place the top beading on top and screw the two wooden moldings together whilst the glue is still setting.

Repeat this process for the bottom half of your poster frame as well.

Whilst you are waiting for the glue to harden, use the smaller drill-bit to drill a hole on the topside at each end of the top of the "frame", and attach the screw eyes: