Creepy HALLOWEEN cushions....

 

 I am having some issues with my photo's for this post, please bare with me whilst I work on resolving this issue!!

Everybody knows a quick way to update your home décor is to add soft furnishings like cushions.

But cool cushions can cost a fortune, so today I want to show you how YOU can make these 3 creepy Halloween cushions for just a little more than £10...

So, when I was making my Paper Mache Halloween pumpkins the other week, I had a lot of time on my hands whilst waiting for the paper Mache layers to dry, So I filled my time with other spooky décor makes, like these creepy cushions, made to match my Pumpkins...

I got some cheap cushion covers from IKEA(£3 each), found some spooky images on the internet, then made up some easy stencils, then got to work with some fabric paint...

Here's how I did it:

First I made my stencils:

I found this skull and crossbones image from Freestockphotos.com, printed it out in the size I wanted...(notice my printer running out of ink...it doesn't matter as the printed bit is what you want to cut out and throw away, so this is a great project to do when you want to use up the last remnants of ink in your printer)

Then I got another bit of paper, and covered it with double sided tape...I then adhered the skull image on: This will not only make the paper in the stencil thicker, but also provide a level of waterproofing, so that your stencil will last longer...

Using a scalpel, carefully cut out the black parts of the image, leaving the white...

 NOTE: If your image has, like the eyes and nose in mine, parts that are NOT connected to the white of the paper, please remember NOTt to cut them out fully, before cutting a little strip of paper to connect these areas with the rest of the stencil.... like in the image above.

 

 Put your cushion cover flat on the table, place the stencil on top and apply the fabric paint with a sponge...The darts of paper holding the eyes and nose in place, will leave lines in your stencilled image....simply fill these in after removing the stencil.

TIP:Before stencilling your cushion covers, place a bit of baking paper inside to prevent the fabric paint to seep through to the back of the cushion.

For my next cushion I used this fabulous skull stencil

 image by Tui-rector from Deviant art...the same one that I used for my scary skull pumpkin.

I repeated the process described above to make it into a stencil...

Having laid the cushion cover flat, with a bit of baking paper inside to prevent bleeding, I used some masking tape to stick my stencil in the position I wanted...

The sponge applicator I am using makes it easier to control the application of the fabric paints...You can find these sort of sponge applicators in kids paintbrush kits...

I used Dylan fabric paints (ca £1.50 per pot) in gold and white for this cushion.

First I stencilled the white skulls on to the cushion cover, then I let this set until dry (10-20 minutes) before applying the gold skulls...

REMEMBER to have some paper towels to hand and blot any excess pint of your stencil every now and then...

When all your fabric paint is completely dry (1-2 hours) take out the baking paper inside the cushion cover, then iron on low heat to set the paint into the fabric...place a bit of muslin or a kitchen towel on top of your design before ironing...

For my last cushion , I chose this creepy crawly spider stencil image from tag body art....

....repeating the processes above.

This really was such an easy and cheap DIY, and I love the result!

Cool cushions can cost a fortune, but I've made these 3 for £13.50, and I still have lots of fabric paint left over for another project or two...

 I have a few more Halloween décor DIY's to show you over the next week, before I reveal my Spooky home décor in its entirety...

so stay tuned for more easy, maybe not subtle, but definitely not cheesy ,Halloween Décor ideas!!

xxx

June

Paper Mache HALLOWEEN Pumpkins

 So we've got to October already...this year is just flying by!! I guess time flies when you are having fun!

With Halloween fast approaching, I thought I'd jump on the pumpkin bandwagon and post a tutorial on how I've made my paper Mache pumpkins for our annual Halloween party!

 With money being tight I was trying to come up with a way to make the house a bit spooky on a budget...In the end I've opted for paper Mache Pumpkins , as not only are they cheap to make, but it's  also a great way to recycle old newspapers...

All you'll need to make the basic pumpkin shapes are:

Balloons

String and masking tape

Old newspapers

flour and water 

Brush 

MAKING THE PUMPKIN SHAPE:

 Blow up a balloon , the deflate and repeat a couple of times...

This makes the rubber in the balloon more stretchy, and will make the next step easier...

Blow it up again, but not fully, then tie it up as usual...

Get some string , or use strips of masking tape, and tie it around the balloon to make the Pumpkin ridges...

Next:

THE PAPER MACHE PASTE

 Simply mix flour and water to a "batter" consistency.

Tear your Newspaper into strips 1-2" wide.

Wet the paper strips with the paste, then brush it onto the balloon.

Overlap slightly until you've covered it all.

Leave this layer to dry completely, before applying the next...

MAKE A DRYING BOX

I was completely surprised at how long the layers of Paper Mache took to dry, as I'd never done Paper Mache before...

Impatient as I am, I decided to make a simple drying box:

I had a big box, (that our new boiler came in), and I strung a bit of masking tape across the top of the box to hang the pumpkins from (attach a bit of string to your pumpkins...), then I made a hole in the side, and stuck my hair drier through, blowing COLD air onto the pumpkins...

(DO NOT be tempted to speed up the process with HOT air, as this will make the balloons swell and will pop your Paper Mache...)

NOTE!!Even with my drying box, it took me almost 3 days to get 4 dry layers of paper Mache onto the balloons..so PATIENCE is definitely a virtue in this project!!

MAKE UP SOME PAPER CLAY

With my basic pumpkin shapes nice and stiff (and fully dried), I decided to emphasise the shape a bit more using some PAPER CLAY:

I used:

Newspapers (torn up)

Toilet roll tissue

water

PVA glue

Flour

I put the paper and tissue in a saucepan and covered with water...

Then I let this boil for a couple of hours until the paper turned to mush..

LET IT COOL DOWN

Then using a blender I mixed in some water and PVA glue ( a big dollop will do),

before draining off excess liquid in a kitchen strainer...squeezing the liquid out as much as possible..

Then I added flour little by little by kneading it in, until it formed a sculpt-able dough.

I added this dough to the areas of the pumpkins I wanted to emphasize, then covered in another layer of newspaper strips using the flour and water paste...

Leave to dry fully( this took about 1 1/2 days )

 ADDING A STEM TO YOUR PUMPKINS:

 I used some masking tape to wrap around the balloon nozzle, to build up a basic stem shape, then covered in two layers of newspaper.....

I then added a layer of white office paper strips, to cover the news paper print, for easier painting.

When I was satisfied that my Pumpkins where fully dry, it was tome to concentrate on making the surface a bit smoother...

PREPPING THE SURFACE

I know this is not how a seasoned Paper Machier would do this, but I didn't want to suffer the expense of a trip to HOBBYCRAFT, so I just used what I had in hand: Quick drying Poly filler (the kind you get in DIY stores for filling cracks in the wall)....

...and it worked just fine!!(If you want to know how it should be done, visit ultimate paper mache)

I used a sponge and wiped a thin layer of poly filler all over the surface of the pumpkins, left to dry, then sanded the surface until satisfactory smooth...

I then Painted my pumpkins with a layer of Acrylic gesso Primer to seal and prep for finishing...

NOTE: This did make my pumpkins quite heavy !!

SCULPTING THE STEM:

  

The stem stubs I created earlier needed a bit of sculpting to finish off the shapes of my pumpkins..

I had a bag of DAS air drying clay (costs about £3-4), and simply squeezed a bit around the stubs, before using my fingers and some water to sculpt into a pumpkin stem...I used this link :Pumpkin images for reference. Then I used a pencil to carve in the detail...

Nothing fancy, my finished pumpkins are not going to look "real"...

Then I left the clay to dry over night...

 

The next day, when the clay was dry (it turns white) I painted the Pumpkin stems black.

I used a liquid tempera paint, but normal poster paint would work jus fine...

I later finished the look of all the pumpkin stems by gold-fingering the details, using rub'n'buff  in antique gold.....

 

Now for the fun part!!

DECORATING THE PUMPKINS

Like I said earlier, I didn't want my pumpkins to try to look real, but I wanted them to be suitably creepy for Halloween, without being to clichéd.....

A LITTLE PINK AND GOLDEN "EYEBALL" PUMPKIN...

 

I almost covered the pumpkin in pink tissue paper, using PVA glue with a little water mixed in.

I didn't bother covering the bottom of the pumpkin at this stage...

When the glue had completely dried, I sprayed it with  a layer of clear lacquer, to harden the surface..

Then I painted the bottom half of the pumpkin with some PVA glue...let this dry until just slightly tacky (ca 15-20minutes), then applied some gold leaves that I already had...(You can get gold leaves at hobbycraft, £10,90 for 25 sheets)...I found this article on how to apply gold leaf very useful, but I didn't necessarily follow the rules...don't worry too much: It's really not too tricky...

 

I flattened the gold leaf using the tissue paper from the gold leaf book, then used a soft brush to remove any excess and break up the edges a bit...

Then I sealed the gold leaves with another layer of clear spray lacquer...

For the finishing touch I mixed some black paint with some PVA glue and dribbled it from the top of the pumpkin, letting it run down the sides, creating a creepy "black blood" effect..

Next up I did ....

.... A CREEPY CRAWLEY BUG PUMPKIN

I simply printed out a couple of sheets worth of "black bugs" from the graphics fairy ....this site has copious amounts of beautiful vintage free printable images, and is well worth a visit!!

I will show you some other projects I have done using images from there later this week!!

I simply printed and cut out the little bugs and glued them on the pumpkin with some PVA glue,

then sealed when dry with a coat of clear spray lacquer...

Next up I made

A SCARY SKULL PUMPKIN

again, I used the internet as a resource, and found this scary scull motif at deviant art...It was perfect as it was already made to be a stencil, and all I had to do was print and cut it out with a scalpel....

TIP: Make the paper thicker by gluing (I used double sided tape) another sheet to the back of your image before cutting, to make your stencil last longer...

 

I spray painted the pumpkin black, then used my stencil to apply some antique gold rub'n'buff...

I sealed with a coat of clear spray lacquer...

  

Lastly I made a

SPIDERWEB PUMPKIN

I actually wanted to use some spider web tights to achieve this, which would've been soo easy, but unfortunately I couldn't get hold of any....So, I ended up using this spider web tablecloth from a £shop instead...

 

I cut a hole in the middle of the fabric, just big enough to get the pumpkin stem through, then used the blunt end of  a scalpel to push the fabric under the stem...(Because I'd sculpted the stem on top of the paper Mache, It actually could be lifted up a bit to allow for this).

 As the tablecloth was not elastic, it was a little more fiddly to do than had I used tights: I had to cut darts out of the fabric , so it didn't bunch up too much....and glue it in place using double sided tape...

...The effect is quite striking!!

Although the self critic in me thinks I could've done better with the actual shape of the pumpkins (Ran out of patience ....waiting for paper to dry!!)I am pretty pleased with the finish of my pumpkins: They all compliment each other and are quite original and suitably scary for Halloween....without being too clichéd...

I have a few more easy Halloween inspired DIY's to show you in the next few weeks, and will reveal our entire spooky house transformation for our Party just before Halloween...

 I hope you have enjoyed this tutorial....any questions will be answered asap, just leave a comment below!

And if you do try this yourself, I would love to see how yours turn out!!

xxx

June